Dimensional Services (Length )
Item Description & Range
Dimensional Services (Length )
This calibration list covers most of our scope of activities for Dimensional Services (Length ) measuring instruments. If you wish to calibrate an equipment which is not listed here or the range exceeds the stated value, please do not hesitate to contact us for further enquiries.
Item Description & Range
| Item Description | Range | Onsite |
| External / Internal / Stick Micrometer | Up to 1000 mm | YES |
| Caliper | Up to 2000 mm | YES |
| Depth Micrometer | Up to 300 mm | YES |
| Stick / Inside Micrometers | Up to 600 mm | YES |
| Height Setting Micrometer & Riser Block | Up to 600 mm | |
| Caliper Checker / Depth Micro Checker | Up to 630 mm | YES |
| Vernier Height / Depth Gauge | Up to 1000 mm | YES |
| Dial Indicator / Digimatic Indicator | Up to 100 mm | YES |
| Dial Test Indicator | Up to 3 mm | YES |
| Plain Plug Gauge / Plain Ring Gauge / Pin Gauge | Up to 400 mm | |
| Thread Ring Gauge | > M2.5 to M100 | |
| Thread Plug Gauge | > M1 to M150 | |
| Feeler Gauge / Shim Stock / Calibration Foil | Up to 10 mm | YES |
| Surface Plate | Up to 2500 x 2000 mm | YES |
| Profile Projector | Up to 500 mm | YES |
| Dial / Digimatic Thickness Gauge | 0 – 200 mm | YES |
| Bore Gauge | 0 – 600 mm | |
| Setting Master for Linear Height Gauge | Up to 30 mm | YES |
| Straight Edge / Linear Height Gauge | Up to 1000 mm | YES |
| Holtest / Borematic | Up to 200 mm | |
| Universal Length Measuring System | 0 – 600 mm | YES |
| Setting Rod for External Micrometer | Up to 1000 mm | |
| Bevel Protractor | Up to 300 mm | |
Measuring Microscope | X & Y axis: 0 – 500 mm | YES |
| Z axis: 0 – 300 mm | ||
| Dial Gauge Calibrator | Up to 100 mm | YES |
| Gauge Block | Up to 100 mm | |
| Sine Bar | Up to 300 mm | |
| Screw Thread Micrometer | 0 – 300 mm | YES |
| Precision Levels (Spirit Level / Inclinometer / Analog) | Up to 300 mm | |
| Vee Block | Up to 150 mm (length) | YES |
| MU-Checker | 0 – 5 mm | |
| Precision Square / Cylinder Square | Up to 450 mm | YES |
| Caliper Gauge | 0 – 500 mm | YES |
| Dial Gauge Stand | 0 – 1 mm | YES |
| Calibration Tester | 0 – 100 mm | YES |
| Internal Micrometer (2-leg type) | 0 – 300 mm | |
| Steel Rule | 0 – 2000 mm | |
| Centre Bench | Up to 1000 mm (Height) | YES |
| Coating Thickness Gauge | Up to 1500 µm | |
| Parallel Bars | Up to 300 mm | YES |
| Co-ordinate Measuring Machine | Up to 1500 mm | YES |
| Micrometer Head | 0 – 100 mm | YES |
| Gauge Block Comparator | Up to 100 mm | YES |
| Dial Depth Gauge | 0 – 200 mm | YES |
| Optical Flats / Parallel | Up to 1 mm | |
| Glass Scale | Up to 300 mm | YES |
| Tapered Ring Gauge (Diameter) | Up to 100 mm | |
| Tapered Ring Gauge (Step Height) | Up to 75 mm | |
| Tapered Plug Gauge (Diameter / Step Height) | Up to 75 mm | |
| Tapered Thread Plug Gauges (Pitch Diameter) | Up to 150 mm | |
| Tapered Thread Plug Gauges (Taper) | 0 to 10° | |
| Tapered Thread Plug/Ring Gauges (Step Height) | Up to 75 mm | |
| Tapered Thread Ring Gauges (Pitch Diameter) | Up to 100 mm | |
| Angle Block | 0.25 to 90° | |
| Height Gauge | Up to 1000 mm | YES |
| Height Master | 0 – 600 mm (height) | YES |
| Digimatic Indicator Linear Gauge | Up to 150 mm | YES |
| Dimensional Air Gauge | Up to 5 mm | YES |
| Long Gauge Block | Up to 500 mm | YES |
| Measuring Tape / Textile Tape | Up to 50 m | |
| Roundness Machine | Up to 200 mm | YES |
| Surface Roughness Tester | Up to 1000 µm | |
| Surface Roughness Standard | Up to 15 µm | |
| Thread Wires | Up to 10 mm (Dia.) | |
Contour Measuring Machine | X axis: Up to 100 mm | YES |
| Z axis: Up to 60 mm |
