Dimensional Services (Length) Calibration Services
This calibration list covers most of our scope of activities for Dimensional Services (Length) measuring instruments. Our comprehensive calibration services ensure accurate length, dimensional, and geometric measurements for various precision instruments including:
• Micrometers: External, internal, depth, and screw thread micrometers (up to 1,000 mm)
• Calipers: Digital, dial, and vernier calipers (up to 2,000 mm)
• Height & Depth Gauges: Height gauges, depth gauges, and linear height gauges (up to 1,000 mm)
• Dial Indicators: Dial indicators, dial test indicators, and digimatic indicators (up to 100 mm)
• Gauge Blocks: Standard and long gauge blocks, gauge block comparators (0.5 mm to 500 mm)
• Surface Measurement: Surface plates, straight edges, and surface roughness testers
• Optical Instruments: Profile projectors, measuring microscopes, and optical flats/parallels
• Coordinate Measuring: Coordinate Measuring Machines (CMM) and Universal Length Measuring Machines (ULM)
• Gauges: Plug gauges, ring gauges, thread gauges, and tapered gauges
• Other: Steel rules, measuring tapes, squares, protractors, sine bars, and specialized dimensional tools
All calibrations are performed in accordance with ISO/IEC 17025 standards with full traceability to national standards. If you wish to calibrate an equipment which is not listed here or the range exceeds the stated value, please do not hesitate to contact us for further enquiries.
Dimensional Services (Length)
List of measuring instruments and calibration ranges with Onsite status.
Singapore0
Thailand0
Malaysia0
| Instrument Type | Range | Onsite |
|---|---|---|
| External Micrometer1 Linearity | (0 to 200) mm
(200 to 500) mm (500 to 1 000) mm |
YES |
| External Micrometers1 Flatness Up to 25 mm diameter | (0 to 0.5) µm | YES |
| External Micrometers1 Parallelism Up to 50 mm diameter | (0 to 1) µm | YES |
| Depth Micrometer | (0 to 300) mm | NO |
| Internal & Stick Micrometer1 | (0 to 200) mm
(200 to 500) mm (500 to 1 000) mm |
YES |
| Micrometer Head | (0 to 50) mm | NO |
| Screw Thread Micrometer1 | (0 to 300) mm | YES |
| Caliper1 | (0 to 600) mm
(601 to 1 000) mm (1001 to 2 000) mm |
YES |
| Caliper Gauge1 | (0 to 500) mm | YES |
| Caliper Checker1 (Step Gauges) Depth Micrometer Checker | (0 to 630) mm | YES |
| Optical Flats/Parallels Flatness Thickness | Up to 10 µm | NO |
| Optical Flats/ Parallels Parallelism | Up to 1 mm | NO |
| Gauge Block Comparator1,4 | ANAB:
(0.5 to 10) mm (10 to 25) mm (25 to 50) mm (50 to 75) mm (75 to 100) mm SAC: (0.5 to 100) mm |
YES |
| Gauge Blocks Length (Dissimilar & Similar Material) | (0.5 to 10) mm
(10 to 25) mm (25 to 50) mm (50 to 75) mm (75 to 100) mm |
NO |
| Long Gauge Blocks (Dissimilar & Similar Material) | (>100 to 125) mm
(>125 to 150) mm (>150 to 175) mm (>175 to 200) mm (>200 to 250) mm (>250 to 300) mm (>300 to 400) mm (>400 to 500) mm |
NO |
| Long Gage Blocks (Dissimilar & Similar Material) | (>100 to 125) mm
(>125 to 150) mm (>150 to 175) mm (>175 to 200) mm (>200 to 250) mm (>250 to 300) mm (>300 to 400) mm (>400 to 500) mm |
NO |
| Height Gauge1 | (0 to 600) mm | YES |
| Height Gauge1 | (600 to 1 000) mm | YES |
| Linear Height Gauge 1Length Setting Master Height Setting Master Parallelism | (0 to 1 000) mm (0 to 30) mm (0 to 10) µm | YES |
| Height Master1 Micrometer Head Length Parallelism Riser Block | (0 to 25) mm (0 to 600) mm (0 to 10) µm (0 to 300) mm | YES |
| Vernier Depth Gauge 1 | (0 to 600) mm (600 to 1 000) mm | YES |
| Dial Depth Gauge1 | (0 to 200) mm | YES |
| Mu Checker | (0 to 5) mm | NO |
| Dial Indicator1 | Up to 100 mm | YES |
| Dial Test Indicator1 | (0 to 3) mm | YES |
| Digimatic Indicator1Linear Gauge | Up to 100 mm | YES |
| Digimatic Indicator1Linear Gauge | Up to 100 mm | YES |
| Dial Gauge Stand / Comparator stand1 | (0 to 1) mm | YES |
| Dial Gauge Calibrator1 | (0 to 100) mm | YES |
| Calibration Tester1 | (0 to 100) mm | YES |
| Bore Gauge | (0 to 600) mm | NO |
| Holtest/ Borematic | (0 to 200) mm | NO |
| Steel Rule | (0 to 300) mm
Up to 600 mm Up to 1 000 mm Up to 1 200 mm |
NO |
| Steel Rule | (0 to 1 500) mm
(1 500 to 2 000) mm |
NO |
| Straight Edge1 | Up to 1 200 mm | YES |
| Surface Plate1,2 Overall Flatness Local Area Flatness (Repeat Readings) | Up to 2 500 mm×2 000 mm Up to 0.1 µm | YES |
| Profile Projector1Optical Comparators | Up to 300 mm | YES |
| Universal Length Measuring Machine1Length | (0 to 500) mm (>500 to 1 000) mm | YES |
| Setting Rod | Up to 100 mm Up to 400 mm Up to 600 mm Up to 1 000 mm | NO |
| Bevel Protractor | Up to 300 mm (0 to 360)º | NO |
| Bevel Protractor | Up to 300 mm (0 to 360)º | NO |
| Precision Levels Spirit Level Inclinometer Level Gauge | 0.01 mm/m to 1 cm/m (0 to 35)° | NO |
| Measuring Microscope1 | ANAB:
(0 to 300) mm SAC: (50 to 200) mm |
YES |
| Sine Bars | (0 to 300) mm | NO |
| Vee Blocks Flatness Squareness Parallelism of Vee | (0 to 1.2) mm | NO |
| Precision Squares | (0 to 450) mm | NO |
| Parallel Bars | (0 to 1.2) mm | NO |
| Centre Bench1 | (0 to 1.2) mm | YES |
| Coating Thickness Gauge | Up to 1 500 µm | NO |
| Roughness Machine1 | (0.3 to 3) µm | YES |
| Roughness Specimen1 | (0.3 to 3) mm | YES |
| Feeler Gauge Shim Shock Calibration Foil | Up to 5 mm | NO |
| Plain Ring Gauge
Snap Gauge Internal Diameter Internal Length |
(>1 to 50) mm (>50 to100) mm (>100 to150) mm (>150 to 200) mm | NO |
| Thread Wires Diameter | Up to 10 mm | NO |
| Plain Plug Gauge / Pin Gauge | Up to 10 mm (10 to 100) mm (100 to 200) mm | NO |
| Thread Plug Gauge (> M1 to M50) Pitch Diameter Major Diameter Pitch | (1 to 200) mm | NO |
| Adjustable Thread Rings Pitch Diameter (tactile fit) Minor Diameter | (0 to 100) mm | NO |
| Solid Thread Ring Gauge Pitch Diameter (tactile fit) Minor Diameter | Up to 2.5 mm (1.2 to 2.5) mm | NO |
| Solid Thread Ring Gauge (> M2.5 to M100) Pitch Diameter (measured) Minor Diameter | (2.5 to 100) mm | NO |
| Coordinate Measuring Machine1 | Up to 1 500 mm | YES |
| Glass Scale | (0 to 150) mm | NO |
| Tapered Ring Gauge Diameter | Up to 100 mm | NO |
| Tapered Ring Gauge Step Height | Up to 75 mm | NO |
| Tapered Plug Gauge Diameter | Up to 75 mm | NO |
| Tapered Plug Gauge Step Height | Up to 75 mm | NO |
| Tapered Thread Plug Gauges Pitch Diameter | Up to 150 mm | NO |
| Tapered Thread Plug Gauges Taper | (0 to 10)° | NO |
| Tapered Thread Plug Gauges Step Height | Up to 75 mm | NO |
| Tapered Thread Ring Gauges Step Height | Up to 75 mm | NO |
| Tapered Thread Ring Gauges Pitch Diameter | Up to 100 mm | NO |
| Measuring Tape / Textile Tape | (0 to 5) m
(>5 to 10) m (>10 to 20) m (>20 to 50) m |
NO |
| Laser Scan Micrometer1 | (0 to 25) mm | YES |
| Layout Measurement Length | X Axis (0 to 300) mm
Y Axis (0 to 100) mm |
NO |
| Layout Measurement Angle | (0 to 360)° | NO |
| Instrument Type | Range | Onsite |
|---|---|---|
| External Micrometers Linearity | (0 to 300) mm (300 to 600) mm (600 to 1 000) mm |
YES |
| External Micrometers Flatness Up to 25 mm diamete | (0 to 0.5) µm | YES |
| External Micrometers Parallelism Up to 50 mm diameter | (0 to 0.5) µm | YES |
| Calipers | (0 to 1 000) mm (1 000 to 2 000) mm |
YES |
| (Digital/Dial) Caliper Gauge | (0 to 150) mm | YES |
| Depth Micrometers | (0 to 300) mm | YES |
| Stick/ Inside Micrometers | (0 to 600) mm | NO |
| Stick/ Inside Micrometers | (0 to 1 000) mm | YES |
| Internal Micrometers 2 leg type | (0 to 200) mm | YES |
| Micrometer Heads | (0 to 100) mm | NO |
| Micrometer Heads | (0 to 50) mm | YES |
| Calibration Testers | (0 to 100) mm | NO |
| Calibration Testers | (0 to 50) mm | NO |
| Height Masters Micrometer Linearity Height Parallelism | (0 to 25) mm (0 to 300) mm (300 to 600) mm (0 to 0.02) mm |
NO |
| Screw Thread Micrometers | (0 to 100) mm | NO |
| Caliper Checkers, Depth Micro Checker | (0 to 630) mm | YES |
| Height Gauges | (0 to 1 000) mm | YES |
| Linear Height Gauges | (0 to 1 000) mm | YES |
| Setting Master for Linear Height Gauges | (0 to 25) mm | YES |
| Depth Gauges | (0 to 600) mm | YES |
| MU Checker | Up to 5 mm | NO |
| Dial Indicato | Up to 10 mm | YES |
| Dial Test Indicato | Up to 3 mm | YES |
| Digimatic Indicator Linear Gauge | (0 to 30) mm (30 to 100) mm (100 to 150) mm |
YES |
| Digital/Dial Thickness Gauges | (0 to 100) mm | YES |
| Dial Gauge Calibrator | (0 to 100) mm | YES |
| Dial Depth Gauges | (0 to 200) mm | YES |
| Plain Plug Gauge / Pin Gauge (External Diameter, Enteral Length) | (0 to 25) mm | NO |
| Plain Plug Gauge / Pin Gauge (External Diameter, Enteral Length) | (>1 to 25) mm (>25 to 50) mm (>50 to 100) mm (>100 to 150) mm (>150 to 200) mm (>200 to 300) mm (>300 to 400) mm |
NO |
| Plain Plug Gauge / Pin Gauge Circularity | (0 to 1) mm | NO |
| Thread Wires External Diameter | Up to 10 mm | NO |
| Thread Wires Circularity | (0 to 1) mm | NO |
| Plain Ring Gauges Snap Gauge(Internal Diameter, Internal Length) | (>1 to 50) mm (>50 to 150) mm (>150 to 200) mm (>200 to 250) mm |
NO |
| Plain Ring Gauges Circularity | (0 to 1) mm | NO |
| Threaded Plug Gauges Major Diameter | (1 to 50) mm (50 to 100) mm (100 to 150) mm |
NO |
| Threaded Plug Gauges Pitch Diameter | (1 to 50) mm (50 to 100) mm (100 to 150) mm |
NO |
| Tapered Ring Gauge Diameter | Up to 100 mm | NO |
| Tapered Ring Gauge Step Height | Up to 75 mm | NO |
| Tapered Plug Gauge Diameter | Up to 75 mm | NO |
| Tapered Plug Gauge Step Height | Up to 75 mm | NO |
| Tapered Plug Gauge Diameter | Up to 75 mm | NO |
| Tapered Plug Gauge Step Height | Up to 75 mm | NO |
| Tapered Thread Plug Gauges Pitch Diameter | Up to 150 m | NO |
| Tapered Thread Plug Gauges Taper | (0 to 10)° | NO |
| Tapered Thread Plug Gauges Step Height | Up to 75 mm | NO |
| Thread Ring Gauges Minor Diameter | Up to 50 mm (50 to 100) mm | NO |
| Thread Ring Gauges Pitch Diameter | Up to 50 mm (50 to 100) mm (1 to 3) mm |
NO |
| Tapered Thread Ring Gauges Step Height | >Up to 75 mm | NO |
| Tapered Thread Ring Gauges Pitch Diameter | Up to 100 mm | NO |
| Feeler Gauges/ Shim Stock/ Calibration Foil | Up to 10 mm | YES |
| Feeler Gauges/ Shim Stock/ Calibration Foil | Up to 10 mm | YES |
| Coating Thickness Gauge | Up to 1500 µm | NO |
| Surface Plates Overall Flatness Local Area Flatness (Repeat Reading) | Up to 4 m Diagonal Up to 0.1 µm | YES |
| Dial Gauge Stands Flatness | Up to 1 mm | YES |
| Profile Projectors 1 X-Y axis Linearity X-Y axis Linearity | (0 to 500) mm | YES |
| Measuring Microscopes 1X-Y axis Linearity X-Y axis Linearity X-Y axis Linearity Z axis Linearity | (0 to 300) mm | YES |
| Profile Projectors Magnification Rotation Angle | 5X 10X 20X 50X 100X (0 to 360)º |
YES |
| Bore Gauges | (0 to 300) mm | NO |
| Holtest / Borematic | ANAB:
(2 to 50) mm (50 to 100) mm (100 to 150) mm SAC: (0 to 50) mm (50 to 100) mm (100 to 200) mm |
NO |
| Straight Edges | Up to 1000 mm | YES |
| Steel Rules | (0 to 1 500) mm (1 500 to 2 000) mm |
NO |
| Measuring Tape / Textile Tape | (0 to 5) m (>5 to 10) m (>10 to 20) m (>20 to 50) m |
NO |
| Squares To 450 mm / 18 in Lengths Parallelism/Straightness Squareness | (0 to 10) mm (0 to 450) mm |
YES |
| Universal Length Measuring Machines (ULM) | (0 to 500) mm | YES |
| Micrometer Setting (End) Rods | (25 to 1 00) mm (100 to 1 000) mm |
NO |
| Bevel Protractors Up to 300 mm | 0 to 360º | NO |
| Inclinometers | (0 to 90)º | NO |
| Analog Levels to 300 mm | (0 to 0.10) mm/m | NO |
| Gauge Block Comparators | (0.5 to 100) mm | YES |
| Gauge Blocks (Dissimilar & Similar Material) | (0.5 to 100) mm | NO |
| Long Gage Blocks (Dissimilar & Similar Material) | (>100 to 125) mm (>125 to 150) mm (>150 to 175) mm |
YES |
| Long Gage Blocks (Dissimilar & Similar Material) | (>100 to 500) mm | YES |
| Angle Block | (0 to 360)º | NO |
| Optical Flats/Parallels Flatness Thickness Parallelism | To 10 µm To 1 mm | NO |
| Sine Bars Roll Distance Parallelism | (25 to 300) mm (0 to 0.01) mm |
NO |
| Vee Blocks To 150 mm Lengths Parallelism of Top Parallelism of Vee Squareness of Sides Centrality of Vee | (0 to 0.01) mm | YES |
| Parallels Straightedge | Up to 1 000 mm | YES |
| Bench Centers Height Centrality | Up to 1 000 mm Up to 200 mm | YES |
| Surface Roughness Testers | Up to 1 000 µm | YES |
| Surface Roughness Standards | Up to 15 µm | YES |
| Roundness Measuring Machines Relative error of Magnification Rotation accuracy in radius Rotation accuracy in axial | (0 to 20) mm (0 to 5) mm (0 to 5) / 75 mm |
YES |
| Magnification Checker (for Roundness Machines) | (0 to 0.4) mm | NO |
| Contour Measuring Machines Radius | Z-Axis (0 to 40) mm X-Axis (0 to 100) mm Up to 12.5 mm |
YES |
| Dimensional Air Gauges | Up to 5 mm | YES |
| Coordinate Measuring Machines Length Probing Angle | X: (0 to 1 500) mm Y: (0 to 1 500) mm Z: (0 to 1 000) mm (0 to 10) µm (0 to 90) ° |
YES |
| Glass Scale | (0 to 100) mm
(0 to 200) mm (0 to 300) mm |
NO |
| Parallel Bar | Up to 300 mm | YES |
| Laser Scan Micrometer | (0 to 25) mm | YES |
| Instrument Type | Range | Onsite |
|---|---|---|
| Geomatics Dimensional Measurement of Jigs, Fixtures, Gauges, and First Artefacts Angle | (0 to 90)° | NO |
| 3D Geomatics Dimensional Measurement of Jigs, Fixtures, Gauges, and First Artefacts3 | (0 to 960) mm | NO |